2134/9444 Thomas Steffen Thomas Steffen Frank Schiller Frank Schiller Michael Blum Michael Blum Roger Dixon Roger Dixon Analysing the reliability of actuation elements in series and parallel configurations for high-redundancy actuation Loughborough University 2012 Redundancy Mechanical actuation Bionics High-redundancy actuator (HRA) Fault-tolerance Multistate Engineering not elsewhere classified 2012-03-07 10:21:28 Journal contribution https://repository.lboro.ac.uk/articles/journal_contribution/Analysing_the_reliability_of_actuation_elements_in_series_and_parallel_configurations_for_high-redundancy_actuation/9228128 A high-redundancy actuator (HRA) is an actuation system composed of a high number of actuation elements, increasing both travel and force above the capability of an individual element. This approach provides inherent fault tolerance: if one of the elements fails, the capabilities of the whole actuator may be reduced, but it retains core functionality. Many different configurations are possible, with different implications for the actuator capability and reliability. This article analyses the reliability of the HRA based on the likelihood of an unacceptable reduction in capability. The analysis of the HRA is a highly structured problem, but it does not fit into known reliability categories (such as the k-out-of-n system), and a fault-tree analysis becomes prohibitively large. Instead, a multi-state systems approach is pursued here, which provides an easy, concise and efficient reliability analysis of the HRA. The resulting probability distribution can be used to find the optimal configuration of an HRA for a given set of requirements.