%0 Conference Paper %A Xu, Xu %A West, Geoff %A Thomson, Rachel %A Parker, Jonathan D. %D 2014 %T The effect of post weld heat treatment on the creep behaviour and microstructural evolution in grade 92 steel welds for steam pipe applications %U https://repository.lboro.ac.uk/articles/conference_contribution/The_effect_of_post_weld_heat_treatment_on_the_creep_behaviour_and_microstructural_evolution_in_grade_92_steel_welds_for_steam_pipe_applications/9233588 %2 https://repository.lboro.ac.uk/ndownloader/files/16814939 %K untagged %K Materials Engineering not elsewhere classified %X Grade 92 steel has been widely applied in the power generation industry for use as steam pipes, headers, tubes, etc. owing to a good combination of creep and corrosion resistance. For the welding of thick section pipes, a multi-pass submerged arc welding process is typically used to achieve sufficient toughness in the weld. To relieve the internal stress in the welds and to stabilise their microstructures, a post weld heat treatment (PWHT) is commonly applied. The heat treatment conditions used for the PWHT have a significant effect on both the resulting microstructure and the creep behaviour of the welds. In this study, interrupted creep tests were carried out on two identical Grade 92 welds that had been given PWHTs at two different temperatures: 732°C and 760°C. It was found that the weld with the lower PWHT temperature had a significantly reduced stain rate during the creep test. In addition, microstructural examination of the welds revealed that the primary location of creep damage was in the heat affected zone in the sample with the lower PWHT temperature, whereas it was in the weld metal in the sample with the higher PWHT temperature. To understand the effect of the different PWHT temperatures on the microstructure, initially the microstructures in the head portions of the two creep test bars were compared. This comparison was performed quantitatively using a range of electron/ion microscopy based techniques. It was apparent that in the sample subjected to the higher PWHT temperature, larger Laves phase particles occurred and increased matrix recovery was observed compared with the sample subjected to the lower PWHT temperature. %I Loughborough University