%0 Thesis %A Powell, Keddon A. %D 2017 %T Improving continuous crystallisation using process analytical technologies: design of a novel periodic flow process %U https://repository.lboro.ac.uk/articles/thesis/Improving_continuous_crystallisation_using_process_analytical_technologies_design_of_a_novel_periodic_flow_process/9239054 %2 https://repository.lboro.ac.uk/ndownloader/files/16821248 %K Continuous %K Crystallisation %K Co-crystal %K Periodic flow %K MSMPR %K Process analytical technologies %K Chemometrics %K State of controlled operation %K Chemical Engineering not elsewhere classified %X In this thesis novel configurations and operating strategies in the mixed suspension mixed product removal (MSMPR) crystalliser are investigated, aided by integrated process analytical technologies (PAT) and crystallisation informatics system (CryPRINS) tools. The MSMPR is an idealised crystalliser model that assumes: steady-state operation; well mixed suspension with no product classification, such that all volume elements contain a mixture of particles (small and large) and crystal size distribution (CSD) that is independent of location in the crystalliser and is identical of the product withdrawn; and uniform supersaturation thought, leading to constant nucleation and growth rates. Single-stage MSMPR designs with continuous recycle/recirculation and modified heat exchanger were investigated and found to minimise fouling, encrustation and transfer line blockages. In particular, a modified MSMPR with baffled heat exchanger was found to significantly reduce the temperature between incoming feed hot feed solution and the cooled crystalliser, leading to a significant reduction in fouling, encrustation and blockages. In addition, the concept of the periodic mixed suspension mixed product removal (PMSMPR) crystallisation process is demonstrated for the first time viz single- and multi-stage cascaded operations. This method of operation involves the periodic transfer of slurry (addition and withdrawal) at high flow rates from either a single stirred vessel or between a number of stirred vessels arranged in series. The PMSMPR is therefore characterised by periodic withdrawals of product slurry. Similar to the MSMPR, the product withdrawn from a PMSMPR has exactly the same composition as the vessel at the time of removal. The rapid withdrawal of slurry at high flow rates in PMSMPR operation leads to the prevention of particle sedimentation and blockage of transfer lines. The transfer of slurry (to/from) the PMSMPR is followed by a holding (or pause) period when no addition or withdrawal of slurry takes place. The holding period extends the mean residence time of the PMSMPR relative to a typical MSMPR, thereby increasing the yield and productivity of crystallisation as more time is allowed for consumption of available supersaturation viz crystal growth and nucleation. A state of controlled operation (SCO) in the periodic flow process, defined as a state of the system that maintains itself despite regular, but controlled disruptions was characterised using the PAT tools and CryPRINS within an intelligent decision support (IDS) framework. The crystallisation of paracetamol (PCM) from isopropyl alcohol (IPA) using different configurations of a single-stage continuous MSMPR crystalliser that incorporated continuous recycle and recirculation loop, and a novel design with baffled heat exchanger was investigated. Crystallisations of PCM-IPA carried out in the MSMPR without heat exchanger suffered from severe fouling, encrustation and blockage problems due to the high level of supersaturation (S = 1.39) in the crystalliser, which was required for the initial burst of nucleation to generate enough particles for later growth, as well as the large temperature difference between the incoming feed (45 oC) and the crystalliser (10 oC). Using the modified MSMPR design with baffled heat exchanger, the challenges of fouling, encrustation and blockage were significantly reduced due to the rapid lowering of the feed stream temperature prior to entering the crystalliser. In addition, the closed loop system led to conservation of material, which is a great benefit since large amounts of materials would otherwise be required if the MSMPR was operated with continuous product removal. This design is great for research purposes, in particular, to investigate process design and optimisation. Continuous crystallisation of PCM in the presence of hydroxyl propyl methyl cellulose (HPMC) additive was investigated in the modified MSMPR design with heat exchanger. HPMC was found to improve the crystallisation performance, leading to complete avoidance of fouling, encrustation and blockages at a concentration of 0.05 wt%. However, the yield of crystallisation was significantly reduced (28.0 %) compared to a control experiment (98.8 %, biased due to fouling/encrustation) performed without additive addition. Regardless, the productivity of crystallisation was more than four times that achieved in batch linear cooling (LC) (0.62 0.86 g/L-min) and batch automated dynamic nucleation control (ADNC) (0.24 0.25 g/L-min) runs. Aspects of the periodic flow crystallisation of single- and multi-component (co-crystals) molecular systems have also been examined to demonstrate the concept of state of controlled operation . The single component systems studied were PCM and glycine (GLY), each representative of compounds with slow and fast growth kinetics, respectively. The co-crystal systems investigated were urea-barbituric acid (UBA) and p Toluenesulfonamide-Triphenylphosphine oxide (p-TSA-TPPO). UBA is a polymorphic co-crystal system with three known forms (I, II and III). Form I UBA was successfully isolated in a three-stage periodic flow PMSMPR crystalliser. This study demonstrates the capability of periodic flow crystallisation for isolation of a desired polymorph from a mixture. p-TSA-TPPO exists in two known stoichiometric co-crystal forms, 1:1 and 3:2 mole ratio p-TSA-TPPO, respectively. The two crystalline forms exhibit solution mediated transformation, which proves to be a difficulty for separation. For this study, the implementation of temperature cycles in batch and flow control in semi-batch and periodic PMSMPR crystallisers were investigated to isolate pure 1:1 and 3:2 p-TSA-TPPO, respectively. Different regions of the ternary diagram of p-TSA, TPPO and acetonitrile (MeCN) were investigated. The desired co-crystal form was isolated all crystallisation platforms investigated. However, greater consistency was observed in the semi-batch and PMSMPR operations respectively. Periodic flow crystallisation in PMSMPR is a promising alternative to conventional continuous MSMPR operation, affording greater degrees of freedom operation, slightly narrower RTD profiles, consistent product crystal quality (size, shape and distribution), longer mean residence times, higher yield and productivity and significant reduction in fouling, encrustation and transfer line blockages over prolonged operating periods. Furthermore, the PMSMPR is a versatile platform that can be used to investigate a range of different molecular systems. Relative to batch operation, the PMSMPR can operate close to equilibrium, however, this is dependent on the system kinetics. In addition, retrofitting of batch crystallisers to operate as PMSMPRS fairly simple and require only subtle changes to the existing design space. The integrated array of PAT sensors consisted of attenuated total reflectance ultra violet/visible spectroscopy (ATR-UV/vis), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), focused beam reflectance measurement (FBRM), particle vision microscopy (PVM) and Raman spectroscopy. The results from the studies reported here illustrate very well the use of PAT and information system tools together to determine when the continuous and periodic MSMPR operations reaches a steady-state or state of controlled operation (i.e. periodic steady-state). These tools provided a better understanding of the variables and operating procedures that influence the two types of operations. %I Loughborough University