Ternary mixtures of sulfolanes and ionic liquids for use in high-temperature supercapacitors Stephen Fletcher Iain Kirkpatrick Rob Thring Rod Dring Joshua L. Tate Harry R.M. Geary Victoria J. Black 2134/32151 https://repository.lboro.ac.uk/articles/journal_contribution/Ternary_mixtures_of_sulfolanes_and_ionic_liquids_for_use_in_high-temperature_supercapacitors/9389690 Ionic liquids are a natural choice for supercapacitor electrolytes. However, their cost is currently high. In the present work, we report the use of ternary mixtures of sulfolane, 3-methyl sulfolane, and quaternary ammonium salts (quats) as low-cost alternatives. Sulfolane was chosen because it has a high Hildebrand solubility parameter (δ H = 27.2 MPa 1/2 ) and an exceptionally high dipole moment (μ = 4.7 D), which means that it mixes readily with ionic liquids. It also has a high flash point (165 °C), a high boiling point (285 °C), and a wide two-electrode (full-cell) voltage stability window ( > 7 V). The only problem is its high freezing point (27 °C). However, by using a eutectic mixture of sulfolane with 3-methyl sulfolane, we could depress the freezing point to -17 °C. A second goal of the present work was to increase the electrical conductivity of the electrolyte beyond its present-day value of 2.1 mS cm -1 at 25 °C, currently provided by butyltrimethylammonium bis(trifluoromethylsulfonyl)imide (BTM-TFSI). We explored two methods of doing this: (1) mixing the ionic liquid with the sulfolane eutectic and (2) replacing the low-mobility TFSI anion with the high-mobility MTC anion (methanetricarbonitrile). At the optimum composition, the conductivity reached 12.2 mS cm -1 at 25 °C. 2018-03-08 14:55:57 Activated carbon Conductivity Eutectic Ionic liquid Sulfolane Supercapacitor Chemical Sciences not elsewhere classified