Zhu, Wenbo Soldering interconnects through self-propagating reaction process This thesis presents a research into the solder interconnects made through the reactive bonding process based on the self-propagating reaction. A numerical study of soldering conditions in the heat affected zone (HAZ) during bonding was initially carried out in order to understand the self-propagating reactive bonding and the related influencing factors. This was subsequently followed by an extensive experimental work to evaluate the feasibility and reliability of the reactive bonding process to enable the optimisation of processing parameters, which had provided a detailed understanding in terms of interfacial characteristics and bonding strengths. In addition, by focusing on the microstructure of the bonds resulted from the self-propagating reactions, the interfacial reactions and microstructural evolution of the bonded structures and effects of high-temperature aging were studied in details and discussed accordingly. To study the soldering conditions, a 3D time-dependent model is established to describe the temperature and stress field induced during self-propagating reactions. The transient temperature and stress distribution at the critical locations are identified. This thus allows the prediction of the melting status of solder alloys and the stress concentration points (weak points) in the bond under certain soldering conditions, e.g. ambient temperature, pressure, dimension and type of solder materials. Experimentally, the characterisation of interconnects bonded using various materials under different technical conditions is carried out. This ultimately assists the understanding of the feasibility, reliability and failure modes of reactive bonding technique, as well as the criteria and optimisation to form robust joints. The formation of phases such as intermetallic compounds (IMCs) and mechanism of interfacial reactions during reactive bonding and subsequent aging are elaborated. The composition, dimension, distribution of phases have been examined through cross-sectional observations. The underlying temperature and stress profile determining the diffusion, crystallization and growth of phases are defined by numerical predictions. XXI Through the comparative analysis of the experimental and numerical results, the unique phases developed in the self-propagating joints are attributed to the solid-liquid-convective diffusion, directional solidification and non-equilibrium crystallization. The recrystallization and growth of phases during aging are revealed to be resulted from the solid-state diffusion and equilibration induced by the high-temperature heating. In conclusion, the interfacial reactions and microstructural evolution of interconnect developed through self-propagating reactive bonding are studied and correlated with the related influencing factors that has been obtained from these predictions and experiments. The results and findings enable the extensive uses of self-propagating reactive bonding technology for new design and assembly capable of various applications in electronic packaging. It also greatly contributes to the fundamentals of the crystallization and soldering mechanism of materials under the non-equilibrium conditions. Self-propagating reaction;Reactive bonding;Soldering condition;Non-equilibrium soldering;Interfacial reaction;Cross-sectional microstructure;Reliability;Mechanical integrity;Influencing factors;High-temperature aging;Mechanical Engineering not elsewhere classified 2016-11-23
    https://repository.lboro.ac.uk/articles/thesis/Soldering_interconnects_through_self-propagating_reaction_process/9539561