2134/11872 Nick Morris Nick Morris Homer Rahnejat Homer Rahnejat Ramin Rahmani Ramin Rahmani Paul King Paul King Brian Fitzsimons Brian Fitzsimons Performance evaluation of piston compression ring through accelerated wear in engine tests Loughborough University 2013 Piston Ring Friction Wear Mechanical Engineering not elsewhere classified 2013-03-06 15:12:13 Conference contribution https://repository.lboro.ac.uk/articles/conference_contribution/Performance_evaluation_of_piston_compression_ring_through_accelerated_wear_in_engine_tests/9548435 Both the piston ring and cylinder bore experience wear throughout their life cycle. Therefore change occurs in the geometrical profile and topography of the ring. In addition, coating on the ring is also subject to wear, thus altering the physical/mechanical property of the contacting surface. These changes affect the tribological performance of the ring-bore conjunction. Geometrical changes often alter the ring contacting profile, which affects the entrainment of the lubricant into the conjunction. This can affect the regime of lubrication, thus mechanisms that contribute to friction. Wear of surfaces also plays some role in boundary friction in terms of topographical changes as well as surface properties such as hardness and asperity shear strength. Most analysis does not take into account changes in tribological conditions which occur as the result of these salient changes in practice. The paper intends to bridge this gap in the fundamental knowledge and provide explanations for some in-field experiences noted with wear of a compression ring in a typical engine test. The method of solution used is based on the average flow factors which are indicative of entrainment of the lubricant through the rough ring-bore conjunction. This approach was initiated by Patir and Cheng, for which realistic topographical parameters according to the stage of the wear process is included. Changes in friction and fuel energy consumed are predicted.