2134/5569 Sreenivasa Rao Gubba Sreenivasa Rao Gubba Salah Ibrahim Salah Ibrahim Weeratunge Malalasekera Weeratunge Malalasekera Assaad R. Masri Assaad R. Masri LES modelling of premixed deflagrating flames in a small scale vented explosion chamber with a series of solid obstructions Loughborough University 2009 LES modelling Explosion Deflagrating flames Mechanical Engineering not elsewhere classified Mechanical Engineering 2009-12-02 16:28:09 Journal contribution https://repository.lboro.ac.uk/articles/journal_contribution/LES_modelling_of_premixed_deflagrating_flames_in_a_small_scale_vented_explosion_chamber_with_a_series_of_solid_obstructions/9563201 In this study, simulations of propagating turbulent premixed deflagrating flames past built in solid obstructions in a laboratory scale explosion chamber has been carried out with the Large Eddy Simulation (LES) technique. The design of the chamber allows for up to three baffle plates to be positioned in the path of the propagating flame, rendering different configurations, hence generating turbulence and modifying the structure of the reaction zone. Five important configurations are studied to understand the feedback mechanism between the flame-flow interactions and the burning rate. In LES, the sub-grid scale (SGS) reaction rate should be accounted for by an appropriate model which can essentially capture the physics. The present work has been carried by using the flame surface density (FSD) model for sub-grid scale reaction rate. The influence of the flow on turbulence and flame 2 propagation as a result of the in-built solid obstructions is also examined. The impact of the number and the position of such baffle plates on the generated overpressure, flame speed and structure are studied. Results from the simulations are compared with experimental data for five configurations and they show good agreement.