Linear friction weld process monitoring of fixture cassette deformations using empirical mode decomposition O.J. Bakker C. Gibson P. Wilson Niels Lohse A.A. Popov 2134/17439 https://repository.lboro.ac.uk/articles/journal_contribution/Linear_friction_weld_process_monitoring_of_fixture_cassette_deformations_using_empirical_mode_decomposition/9564350 Due to its inherent advantages, linear friction welding is a solid-state joining process of increasing importance to the aerospace, automotive, medical and power generation equipment industries. Tangential oscillations and forge stroke during the burn-off phase of the joining process introduce essential dynamic forces, which can also be detrimental to the welding process. Since burn-off is a critical phase in the manufacturing stage, process monitoring is fundamental for quality and stability control purposes. This study aims to improve workholding stability through the analysis of fixture cassette deformations. Methods and procedures for process monitoring are developed and implemented in a fail-or-pass assessment system for fixture cassette deformations during the burn-off phase. Additionally, the de-noised signals are compared to results from previous production runs. The observed deformations as a consequence of the forces acting on the fixture cassette are measured directly during the welding process. Data on the linear friction-welding machine are acquired and de-noised using empirical mode decomposition, before the burn-off phase is extracted. This approach enables a direct, objective comparison of the signal features with trends from previous successful welds. The capacity of the whole process monitoring system is validated and demonstrated through the analysis of a large number of signals obtained from welding experiments. 2015-05-07 10:36:44 Linear friction welding Process condition monitoring Hilbert–Huang transform Time-frequency analysis Empirical mode decomposition Non-stationary signal Mechanical Engineering not elsewhere classified Mechanical Engineering