Rotary ultrasonic bone drilling: improved pullout strength and reduced damage Vishal Gupta Pulak M. Pandey Vadim Silberschmidt 2134/24061 https://repository.lboro.ac.uk/articles/journal_contribution/Rotary_ultrasonic_bone_drilling_improved_pullout_strength_and_reduced_damage/9570548 Bone drilling is one of the most common operations used to repair fractured parts of bones. During a bone drilling process, microcracks are generated on the inner surface of the drilled holes that can detrimentally affect osteosynthesis and healing. This study focuses on the investigation of microcracks and pullout strength of cortical-bone screws in drilled holes. It compares conventional surgical bone drilling (CSBD) with rotary ultrasonic bone drilling (RUBD), a novel approach employing ultrasonic vibration with a diamond-coated hollow tool. Both techniques were used to drill holes in porcine bones in an in-vitro study.Scanning electron microscopy was used to observe microcracks and surface morphology. The results obtained showed a significant decrease in the number and dimensions of microcracks generated on the inner surface of drilled holes with the RUBD process in comparison to CSBD. It was also observed that a higher rotational speed and a lower feed rate resulted in lower damage, i.e. fewer microcracks. Biomechanical axial pullout strength of a cortical bone screw inserted into a hole drilled with RUBD was found to be much higher (55–385%) than that for CSBD. 2017-02-09 14:01:49 untagged Mechanical Engineering not elsewhere classified