Bridge, Jack C. Aylott, Jonathan W. Brightling, Christopher E. Ghaem-Maghami, Amir M. Knox, Alan J. Lewis, Mark Rose, Felicity R.A.J. Morris, Gavin E. Adapting the electrospinning process to provide three unique environments for a tri-layered in vitro model of the airway wall Electrospinning is a highly adaptable method producing porous 3D fibrous scaffolds that can be exploited in in vitro cell culture. Alterations to intrinsic parameters within the process allow a high degree of control over scaffold characteristics including fiber diameter, alignment and porosity. By developing scaffolds with similar dimensions and topographies to organ- or tissue-specific extracellular matrices (ECM), micro-environments representative to those that cells are exposed to in situ can be created. The airway bronchiole wall, comprised of three main micro-environments, was selected as a model tissue. Using decellularized airway ECM as a guide, we electrospun the non-degradable polymer, polyethylene terephthalate (PET), by three different protocols to produce three individual electrospun scaffolds optimized for epithelial, fibroblast or smooth muscle cell-culture. Using a commercially available bioreactor system, we stably co-cultured the three cell-types to provide an in vitro model of the airway wall over an extended time period. This model highlights the potential for such methods being employed in in vitro diagnostic studies investigating important inter-cellular cross-talk mechanisms or assessing novel pharmaceutical targets, by providing a relevant platform to allow the culture of fully differentiated adult cells within 3D, tissue-specific environments. Electrospinning;3D cell culture;Electrospinning, 3D Cell Culture, Bioreactor, Airway, Tissue Engineering, In Vitro Model;Airway;Tissue engineering;In Vitro Model;Medical and Health Sciences not elsewhere classified 2015-04-22
    https://repository.lboro.ac.uk/articles/journal_contribution/Adapting_the_electrospinning_process_to_provide_three_unique_environments_for_a_tri-layered_in_vitro_model_of_the_airway_wall/9626936