jmmp-04-00048.pdf (1.28 MB)
Characterisation of laser system power draws in materials processing
journal contribution
posted on 2020-05-18, 10:22 authored by Nick Goffin, Lewis JonesLewis Jones, John TyrerJohn Tyrer, Jinglei Ouyang, Paul Mativenga, Elliot WoolleyElliot WoolleyDue to their high speed and versatility, laser processing systems are now commonplace in many industrial production lines. However, as the need to reduce environmental impact from the manufacturing industry becomes more urgent, there is the opportunity to evaluate laser processing systems to identify opportunities to improve energy efficiencies and thus reduce their carbon footprint. While other researchers have studied laser processing, the majority of previous work on laser systems has focused on the beam-material interaction, overlooking the whole system viewpoint and the significance of support equipment. In this work a methodical approach is taken to design a set of energy modelling terminologies and develop a structured power metering system for laser systems. A 300 W fibre laser welding system is used to demonstrate the application of the power characterization system by utilizing a purpose-built power meter. The laser is broken down according to sub-system, with each part analysed separately to give acomplete overall power analysis, including all auxiliary units. The results show that the greatest opportunities for efficiency improvements lie in the auxiliary units that support the laser devices as these were responsible for 72.2% of the total power draw with the remainder largely apportioned to electrical supply inefficiencies. The laser device drew just 3.5% of the system power at the beam power levels studied. The implications of these results on laser processing system design are then discussed as is the suitability of the characterization process for use by industry on a range of specific laser processing systems.
Funding
EPSRC, grant number EP/S018190/1.
History
School
- Mechanical, Electrical and Manufacturing Engineering
Published in
Journal of Manufacturing and Materials ProcessingVolume
4Issue
2Publisher
MDPIVersion
- VoR (Version of Record)
Rights holder
© The AuthorsPublisher statement
This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/).Acceptance date
2020-05-18Publication date
2020-05-19Copyright date
2020eISSN
2504-4494Publisher version
Language
- en
Depositor
Dr Elliot Woolley. Deposit date: 18 May 2020Article number
48Usage metrics
Categories
No categories selectedKeywords
Licence
Exports
RefWorks
BibTeX
Ref. manager
Endnote
DataCite
NLM
DC