Loughborough University
Browse
Wright_etal_JMCC_2014.pdf (1.71 MB)

Fused H-shaped tetrathiafulvalene-oligothiophenes as charge transport materials for OFETs and OPVs

Download (1.71 MB)
journal contribution
posted on 2017-06-16, 12:50 authored by Iain Wright, Neil J. Findlay, Sasikumar Arumugam, Anto R. Inigo, Alexander L. Kanibolotsky, Pawel Zassowski, Wojciech Domagala, Peter J. Skabara
A series of hybrid tetrathiafulvalene-oligothiophene compounds has been synthesised, where the tetrathiafulvalene unit is fused at each side to an end-capped oligothiophene chain of varying length (terthiophene, quinquithiophene and septithiophene). Each hybrid structure (1-3) has been studied by cyclic voltammetry and triple EPR-UV-Vis-NIR spectroelectrochemistry in the case of the quinquithiophene compound (2). Comparison is made with the corresponding half-units, which lack the fulvalene core and contain just one oligothiophene chain. The highest hole mobility of quinquithiophene-TTF 2 was obtained from field effect transistors (8.61 × 10-3 cm 2 V-1 s-1); its surface morphology was characterised by tapping mode atomic force microscopy and a power conversion of 2.5% was achieved from a bulk heterojunction organic solar cell device using PC71BM as the acceptor. This journal is © the Partner Organisations 2014.

Funding

P. J. S. thanks the Royal Society for a Wolfson Research Merit Award and the EPSRC for funding. W. D. & P. Z. acknowledge the support of the Laboratory of Advanced Spectroelectrochemical Studies, established with financial contribution of the Polish National Science Centre grant no. 2011/03/D/ST5/ 06042.

History

School

  • Science

Department

  • Chemistry

Published in

Journal of Materials Chemistry C

Volume

2

Issue

15

Pages

2674 - 2683

Citation

WRIGHT, I.A. ...et al., 2014. Fused H-shaped tetrathiafulvalene-oligothiophenes as charge transport materials for OFETs and OPVs. Journal of Materials Chemistry C, 2 (15), pp. 2674 - 2683

Publisher

© The Royal Society of Chemistry

Version

  • AM (Accepted Manuscript)

Publisher statement

This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/

Publication date

2014

Notes

This article was published in the journal Journal of Materials Chemistry C [© Royal Society of Chemistry] and the definitive version is available at: http://dx.doi.org/10.1039/c3tc32571g

ISSN

2050-7534

eISSN

2050-7526

Language

  • en

Usage metrics

    Loughborough Publications

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC