Buswell_Richard_021_R1.pdf (541.83 kB)
Inspection methods for 3D concrete printing
conference contribution
posted on 2020-05-04, 12:55 authored by Richard BuswellRichard Buswell, Peter KinnellPeter Kinnell, Jerry Xu, Norman Hack, Harald Kloft, Mehdi Maboudi, Markus Gerke, Peter Massin, Georg Grasser, Rob Wolfs, Freek Bos3D Concrete Printing (3DCP) is being used for off-site manufacture of many elements found in the built environment, ranging from furniture to bridges. The advantage of these methods is the value added through greater geometrical freedom because a mould is not needed to create the form. In recent years, research has focused on material properties both in the wet and hardened state, while less attention has been paid to verifying printed forms through geometry measurement. Checking conformity is a critical aspect of manufacturing quality control, particularly when assembling many components, or when integrating/interfacing parts into/with existing construction. This paper takes a case study approach to explore applications of digital measurement systems prior to, during, after manufacture using 3DCP and after the assembly of a set of 3DCP parts and discusses the future prospects for such technology as part of geometry quality control for the procurement of 3DCP elements for the built environment.
Funding
OTH Manufacturing integrated building components using digital hybrid Concrete Printing (HCP) technology
CAMBER - Concrete Additive Manufacturing for the Built Environment using Robotics : EP/P031420/1
History
School
- Architecture, Building and Civil Engineering
- Mechanical, Electrical and Manufacturing Engineering
Published in
Second RILEM International Conference on Concrete and Digital Fabrication. DC 2020Pages
790-803Source
2nd RILEM International Conference on Concrete and Digital Fabrication (Digital Concrete 2020)Publisher
SpringerVersion
- AM (Accepted Manuscript)
Publisher statement
This is a pre-copyedited version of a contribution published in Bos F., Lucas S., Wolfs R., Salet T. (eds) Second RILEM International Conference on Concrete and Digital Fabrication. DC 2020. The definitive authenticated version is available online via https://doi.org/10.1007/978-3-030-49916-7_78Acceptance date
2020-04-20Publication date
2020-07-08Copyright date
2020ISBN
9783030499150ISSN
2211-0844Publisher version
Book series
RILEM Bookseries, vol 28Language
- en
Editor(s)
Bos F., Lucas S., Wolfs R., Salet TLocation
Eindhoven University of Technology, The NetherlandsEvent dates
6th July 2020 - 9th July 2020Depositor
Mr Jerry Xu . Deposit date: 2 May 2020Usage metrics
Categories
No categories selectedLicence
Exports
RefWorks
BibTeX
Ref. manager
Endnote
DataCite
NLM
DC