Loughborough University
Browse
Silberschmidt_SCTS 2019 accepted.pdf (3.65 MB)

SPH-BEM simulation of underwater explosion and bubble dynamics near rigid wall

Download (3.65 MB)
journal contribution
posted on 2019-03-14, 14:16 authored by Zhifan Zhang, Cheng Wang, A.M. Zhang, Vadim SilberschmidtVadim Silberschmidt, Longkan Wang
A process of underwater explosion of a charge near a rigid wall includes three main stages: charge detonation, bubble pulsation and jet formation. A smoothed particle hydrodynamics (SPH) method has natural advantages in solving problems with large deformations and is suitable for simulation of processes of charge detonation and jet formation. On the other hand, a boundary element method (BEM) is highly efficient for modelling of the bubble pulsation process. In this paper, a hybrid algorithm, fully utilizing advantages of both SPH and BEM, was applied to simulate the entire process of free and near-field underwater explosions. First, a numerical model of the free-field underwater explosion was developed, and the entire explosion process– from the charge detonation to the jet formation–was analysed. Second, the obtained numerical results were compared with the original experimental data in order to verify the validity of the presented method. Third, a SPH model of underwater explosion for a column charge near a rigid wall was developed to simulate the detonation process. The results for propagation of a shock wave are in good accordance with the physical observations. After that, the SPH results were employed as initial conditions for the BEM to simulate the bubble pulsation. The obtained numerical results show that the bubble expanded at first and then shrunk due to a differences of pressure levels inside and outside it. Here, a good agreement between the numerical and experimental results for the shapes, the maximum radius and the movement of the bubble proved the effectiveness of the developed numerical model. Finally, the BEM results for a stage when an initial jet was formed were used as initial conditions for the SPH method to simulate the process of jet formation and its impact on the rigid wall. The numerical results agreed well with the experimental data, verifying the feasibility and suitability of the hybrid algorithm. Besides, the results show that, due to the effect of the Bjerknes force, a jet with a high speed was formed that may cause local damage to underwater structures.

Funding

This work was supported by the National Natural Science Foundation of China (Grant Nos. 11802025 & 11732003), China Postdoctoral Science Foundation (Grant No. 2017M620644), Science Challenge Project (Grant No. TZ2016001) and the State Key Laboratory of Explosion Science and Technology (Grant No. YBKT17-08).

History

School

  • Mechanical, Electrical and Manufacturing Engineering

Published in

Science China Technological Sciences

Citation

ZHANG, Z. ... et al., 2019. SPH-BEM simulation of underwater explosion and bubble dynamics near rigid wall. Science China Technological Sciences, 62 (7), pp.1082–1093.

Publisher

© Science China Press and Springer-Verlag

Version

  • AM (Accepted Manuscript)

Publisher statement

This is a post-peer-review, pre-copyedit version of an article published in Science China Technological Sciences. The final authenticated version is available online at: https://doi.org/10.1007/s11431-018-9420-2.

Acceptance date

2018-12-21

Publication date

2019-02-25

ISSN

1674-7321

eISSN

1869-1900

Language

  • en

Usage metrics

    Loughborough Publications

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC