Loughborough University
Browse
Capability of graphene on improving the electrical .pdf (828.15 kB)

The capability of graphene on improving the electrical conductivity and anti-corrosion properties of Polyurethane coatings

Download (828.15 kB)
journal contribution
posted on 2017-03-10, 16:57 authored by Yao Tong, Siva Bohm, Mo Song
Graphite and graphene particles were used to reinforce the electrical conductivity and anti-corrosion properties of polyurethane (PU) coatings. The effect of graphite and graphene were compared. Hybrid filler using carbon nanotube was adopted as well and the performance in electrical conductivity was much superior to single filler system. At the same filler loading, the electrical conductivity of hybrid filler system was significantly higher than single filler system (0.77 S/m at 5 wt% while single filler system was not conductive). The conductive mechanism was revealed. In terms of anti-corrosion properties, the coatings with low filler loading had better anti-corrosion properties. The resistance values obtained from EIS (Electrochemical Impedance Spectroscopy) and four point probe method were compared and discussed.

Funding

We thank TATA Steel and the PhD scholarship of Loughborough University for providing the funding for this work.

History

School

  • Aeronautical, Automotive, Chemical and Materials Engineering

Department

  • Materials

Published in

Applied Surface Science

Citation

TONG, Y., BOHM, S. and SONG, M., 2017. The capability of graphene on improving the electrical conductivity and anti-corrosion properties of Polyurethane coatings. Applied Surface Science, 424, pt.1. pp.72-81.

Publisher

© Elsevier

Version

  • AM (Accepted Manuscript)

Publisher statement

This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/

Acceptance date

2017-02-10

Publication date

2017

Notes

This paper was accepted for publication in the journal Applied Surface Science and the definitive published version is available at http://dx.doi.org/10.1016/j.apsusc.2017.02.081

ISSN

0169-4332

Language

  • en

Usage metrics

    Loughborough Publications

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC