RJack SEEDS Paper 107 Final Submission.pdf (278.17 kB)

Quantifying the effect of window opening on the measured heat loss of a test house

Download (278.17 kB)
conference contribution
posted on 21.09.2015 by Richard Jack, Dennis Loveday, David Allinson, Kevin Lomas
Opening windows is a common method for controlling air temperature, moisture, air quality and odours in dwellings. Opening a window in winter will increase the heat loss from a house, the additional heat loss will depend on the size of the window opening and the length of time for which the window is open. However, window opening behaviour is unpredictable, varying widely between different dwellings and occupants making it difficult to incorporate into predictions of energy consumption. This paper reports the results of an investigation to quantify the impact of window opening on the measured air tightness and total heat loss in a detached, timber framed test house built in the year 2000 to contemporary building standards, and located at Loughborough University. Blower door tests were used to measure the increase in ventilation caused by opening windows. The additional heat loss due to this ventilation was predicted using a simple model and then compared to the whole house heat loss as measured by a co-heating test. A linear relationship between window opening area and additional ventilation was found, independent of window location. This relationship was used to quantify the additional heat loss for a variety of window opening behaviours. The results show that window opening does not significantly increase heat loss rates in this particular house for all but the most extreme window opening behaviours. The implications of these results for different types of dwelling are discussed.

History

School

  • Architecture, Building and Civil Engineering

Published in

International SEEDS Conference 2015: Sustainable Ecological Engineering Design for Society

Citation

JACK, R. ... et al, 2015. Quantifying the effect of window opening on the measured heat loss of a test house. International SEEDS Conference 2015: Sustainable Ecological Engineering Design for Society, Leeds Beckett University, Leeds, UK, 17th-18th September 2015.

Publisher

Leeds Beckett University

Version

AM (Accepted Manuscript)

Publisher statement

This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/

Publication date

2015

Notes

This is a conference paper.

Language

en

Location

Leeds Beckett University

Exports

Logo branding

Exports