3D printed dielectric Fresnel lens
conference contribution
posted on 2016-11-04, 14:17 authored by Shiyu Zhang© 2016 European Association of Antennas and Propagation.This paper presents the design and fabrication of a zone plate Fresnel lens. 3D Printing is used for rapid prototyping this low-cost and light-weight lens to operate at 10 GHz. This lens is comprised of four different 3D printed dielectric zones to form phase compensation in a Fresnel lens. The dielectric zones are fabricated with different infill percentage to create tailored dielectric constants. The dielectric lens offers 18 dBi directivity at 10 GHz when illuminated by a waveguide source.
History
School
- Mechanical, Electrical and Manufacturing Engineering
Published in
2016 10th European Conference on Antennas and Propagation, EuCAP 2016Citation
ZHANG, S., 2016. 3D printed dielectric Fresnel lens. Presented at the 2016 10th European Conference on Antennas and Propagation, (EuCAP 2016), Davos, Switzerland, 10-15th April.Publisher
IEEEVersion
- AM (Accepted Manuscript)
Publication date
2016Notes
Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.ISBN
9788890701863Publisher version
Language
- en
