Loughborough University
Approved version.pdf (1.22 MB)

Experimental assessment of vapour chamber heat spreader implementation in avionic cooling

Download (1.22 MB)
conference contribution
posted on 2016-01-25, 14:39 authored by Andy Jones, Rui Chen, Angus Murray
Avionic thermal management is quickly becoming the limiting factor of aircraft performance and reliability, particularly prevalent with ageing airframes. While the increasing power density of avionic components requires a greater heat removal capacity for a given geometric module size, supplementary generation of cooling airflow is detrimental to engine and aircraft performance. This paper looks at improving the heat removal efficiency of forced convection cooled avionic modules by reducing the thermal resistance between the avionic component and module heat exchanger. The implementation of two-phase high thermal conductivity materials, such as Vapour Chamber Heat Spreaders (VCHS), embedded within the avionic module chassis act to improve heat exchanger isothermalisation, improving the effective heat transfer area. A bespoke test rig has been manufactured to experimentally compare a pure aluminium and embedded VCHS avionic chassis for heat removal capability. When considering a single circuit card, a direct mass flow rate reduction of between 22% and 65% is achieved with embedded VCHS over a pure aluminium chassis. Base plate isothermalisation is improved by 9%, generating a reduction in component temperature of 8% to 12%. As the number of heat sources increase, the performance improvements decrease. When testing with three circuit cards mass flow rate savings are reduced to between 14% and 26%. The concluding performance characteristic of the embedded VCHS avionic base plate is the insensitivity to the way thermal energy is coupled to it. Across all testing, the localised heat removal was never further than 3.5% from the averaged plate performance.


The project is co-funded by EPSRC (Engineering and Physical Sciences Research Council, UK) and BAE Systems.



  • Aeronautical, Automotive, Chemical and Materials Engineering


  • Aeronautical and Automotive Engineering

Published in

AIAA SciTech, 53rd AIAA Aerospace Sciences Meeting


AIAA 2015-0712


JONES, A, CHEN, R. and MURRAY, A., 2015. Experimental assessment of vapour chamber heat spreader implementation in avionic cooling. Presented at: 53rd AIAA Aerospace Sciences Meeting, AIAA SciTech, Kissimmee, Florida, USA, AIAA 2015-071.


© American Institute of Aeronautics and Astronautics


  • AM (Accepted Manuscript)

Publisher statement

This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/

Publication date



This paper was accepted for publication by the AIAA and the definitive published version is available at http://dx.doi.org/10.2514/6.2015-0712


  • en


Kissimmee, Florida, USA

Usage metrics

    Loughborough Publications


    Ref. manager