File(s) not publicly available
Reason: Unsuitable version.
Additively manufactured ultra-low sintering temperature, low loss Ag2Mo2O7 ceramic substrates
journal contributionposted on 02.09.2020 by Athanasios Goulas, George Chi-Tangyie, Dawei Wang, Shiyu Zhang, Annapoorani Ketharam, Vaidhy Vaidhyanathan, Ian M Reaney, Darren Cadman, William Whittow, J. C. Vardaxoglou, Daniel Engstrom
Any type of content formally published in an academic journal, usually following a peer-review process.
Ultra-low sintering temperature silver molybdenum oxide (Ag2Mo2O7) ceramics have been printed using direct ink writing (a material extrusion additive manufacturing process) for the first time. An optimum densification conditions of 460 °C / 2 h was determined, resulting in relative permittivity, εr = 13.45, dielectric loss, tanδ = 0.0005, microwave quality factor, Q × f = 17,056 GHz and the temperature coefficient of resonant frequency τf = −121 ppm/°C. The results were comparable to the dielectric properties of conventionally fabricated ceramics. A series of metal/ceramic antenna designs were produced via dual-printing and co-firing, to demonstrate the potential of Ag2Mo2O7, to be used as a co-firable dielectric material for functional integrated circuits and/or microwave RF devices through multi-material direct ink writing.
Read the paper on the publisher website
EPSRC research grant SYMETA (EP/N010493/1).
- Mechanical, Electrical and Manufacturing Engineering
- Aeronautical, Automotive, Chemical and Materials Engineering