File(s) under embargo

Reason: Publisher requirement

72

days

6

hours

until file(s) become available

Analysis of flame structure using detailed chemistry and applicability of flamelet/progress variable model in the laminar counter-flow diffusion flames of pulverized coals

journal contribution
posted on 06.10.2020 by Shota Akaotsu, Yohsuke Matsushita, Hideyuki Aoki, Weeratunge Malalasekera
Pulverized coal is still found in many practical devices even though it is recognized as ‘‘dirty fuel” because of its CO2 and pollutant emissions. To overcome this problem, advanced coal utilization technologies have been developed using numerical simulations. In this study, the structures of the laminar counter-flow diffusion flames of pulverized coals were investigated by performing simulations based on detailed chemistry. The high-temperature region became narrower as the coal/air ratio increased, because of the departure from the stoichiometric mixture and local quenching by the heat transfer between the gas and solid phases. Further, the applicability of the flamelet/progress-variable (FPV) model was investigated through a priori and a posteriori tests. The a priori test confirmed that the FPV model is capable of reproducing the numerical solutions obtained using the detailed chemistry, including the mass fractions of minor species. In the a posteriori test, there was a slight difference between the FPV model and detailed chemistry results due to overestimation of the progress of the chemical reactions. Given the sufficiently high accuracy of the FPV model in various numerical conditions, it can be concluded that the extended FPV model has potential for use in turbulent coal combustion simulations.

Funding

Japan Society for the Promotion of Science (JSPS) Grant-in-Aid for Research Fellows [Grant No. 18J11135]

History

School

  • Mechanical, Electrical and Manufacturing Engineering

Published in

Advanced Powder Technology

Volume

31

Issue

3

Pages

1302 - 1322

Publisher

Elsevier and The Society of Powder Technology Japan

Version

AM (Accepted Manuscript)

Rights holder

© 2019 The Society of Powder Technology Japan

Publisher statement

This paper was accepted for publication in the journal Advanced Powder Technology and the definitive published version is available at https://doi.org/10.1016/j.apt.2019.12.019

Acceptance date

18/12/2019

Publication date

2020-01-08

Copyright date

2020

ISSN

0921-8831

eISSN

1568-5527

Language

en

Depositor

Prof Weeratunge Malalasekera . Deposit date: 6 October 2020

Exports