Rahmani_et_al_2009_Trib_Int.pdf (435.59 kB)

Analytical analysis and optimisation of the Rayleigh step slider bearing

Download (435.59 kB)
journal contribution
posted on 06.08.2013 by Ramin Rahmani, Ayoub Shirvani, Hassan Shirvani
In tribology, the Rayleigh step is known as a bearing with the highest load capacity amongst all other possible bearing geometries. In classical resources on tribology, it is also shown that there is an optimum geometry for the Rayleigh step providing the highest load capacity. However, the analyses are confined to a special case where the effect of hydrostatic pressure is neglected. Furthermore, the possible optimum parameters in terms of the friction force and/or friction coefficient as well as the lubricant flow rate have not been discussed. In this study, the Rayleigh step is comprehensively analysed including the effect of variations of pressure at the boundaries on the optimum parameters. In addition, the bearing is also optimised considering lubricant flow rate, friction force and friction coefficient. It is shown that the optimum bearing parameters are strictly dependent on the variations of the pressure at the boundaries. It is also verified that the optimum point(s) in terms of load capacity are not necessarily equal to the optimum point(s) considering friction coefficient and/or lubricant flow rate even though if there is no pressure difference between bearing endings.

History

School

  • Mechanical, Electrical and Manufacturing Engineering

Citation

RAHMANI, R., SHIRVANI, A. and SHIRVANI, H., 2009. Analytical analysis and optimisation of the Rayleigh step slider bearing. Tribology International, 42 (5), pp.666-674.

Publisher

© Elsevier

Version

AM (Accepted Manuscript)

Publication date

2009

Notes

This is the author’s version of a work that was accepted for publication in the journal, Tribology International. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. A definitive version was subsequently published at: http://dx.doi.org/10.1016/j.triboint.2008.09.002

ISSN

0301-679X

Language

en

Exports