LLatas and Osmani_WM_2016.pdf (1.02 MB)
0/0

Development and validation of a building design waste reduction model

Download (1.02 MB)
journal contribution
posted on 23.06.2016 by C. Llatas, Mohamed Osmani
Reduction in construction waste is a pressing need in many countries. The design of building elements is considered a pivotal process to achieve waste reduction at source, which enables an informed prediction of their wastage reduction levels. However the lack of quantitative methods linking design strategies to waste reduction hinders designing out waste practice in building projects. Therefore, this paper addresses this knowledge gap through the design and validation of a Building Design Waste Reduction Strategies (Waste ReSt) model that aims to investigate the relationships between design variables and their impact on onsite waste reduction. The Waste ReSt model was validated in a real-world case study involving 20 residential buildings in Spain. The validation process comprises three stages. Firstly, design waste causes were analyzed. Secondly, design strategies were applied leading to several alternative low waste building elements. Finally, their potential source reduction levels were quantified and discussed within the context of the literature. The Waste ReSt model could serve as an instrumental tool to simulate designing out strategies in building projects. The knowledge provided by the model could help project stakeholders to better understand the correlation between the design process and waste sources and subsequently implement design practices for low-waste buildings.

Funding

The authors are grateful to the Consejería de Vivienda y Ordenación del Territorio de la Junta de Andalucía (Department of Housing and Regional Planning of the Andalusian Government) for subsiding the Research Project "-CDWs = + ECO-efficiency. Waste Reduction in the Design and Construction of Dwellings in Andalusia” (Andalusian Government, 2009).

History

School

  • Architecture, Building and Civil Engineering

Published in

Waste Management (In Press)

Volume

xx

Issue

xx

Pages

xx - xx

Citation

LLATAS, C. and OSMANI, M., 2016. Development and validation of a building design waste reduction model. Waste Management, 56, pp. 318-336.

Publisher

© Elsevier

Version

AM (Accepted Manuscript)

Publisher statement

This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/

Acceptance date

25/05/2016

Publication date

2016-06-10

Notes

This paper was accepted for publication in the journal Waste Management and the definitive published version is available at http://dx.doi.org/10.1016/j.wasman.2016.05.026

ISSN

0956-053X

Language

en

Exports