AIAAJ-2015finalauthorversion.pdf (1.3 MB)
0/0

Simulation of Particle Flow in Inertial Particle Separators with Eulerian VR-QMOM Method

Download (1.3 MB)
journal contribution
posted on 20.01.2020 by Dan Sun, Andrew Garmory, Gary Page, Indi H. Tristanto
This paper presents research into practical simulations of particle flow in inertial particle separators typically used in helicopter and tilt-rotor aircraft propulsion systems. The flowfield of the carrier gas is predicted by a Reynolds-averaged Navier–Stokes computational-fluid-dynamics method with the Reynolds-Averaged turbulence model. An Eulerian methodology is used to trace the trajectories of foreign particles such as droplets, ice, and sand. To predict the characteristics of particle wall bouncing in dilute particle flow, the velocity-reassociated two-node quadrature-based method of moments is used. The particle distributions in the inertial particle separatorare predicted for various particle sizes, and these are compared with results from a Lagrangian particle-tracking method. The particle–wallinteractions and the separation efficiencies are studied for solid particles bouncing off perfectly elastic walls and an inertial particle separator shell coated with the M246 alloy, which changes the coefficients of restitution. The simulated separation efficiencies predicted by the Eulerian method are compared with the simulation using the Lagrangian method over a range of particle sizes. The velocity-reassociated two-node quadrature-based method of moments is seen to reproduce the particle bouncing and trajectory crossing behavior and to agree well with the Lagrangian method for predicted separation efficiencies. The new velocity-reassociated two-node quadrature-based method of moments is shown to be an accurate and convenient alternative to established Lagrangian approaches.

Funding

This work has been funded by the Innovate UK (formerly the United Kingdom Technology Strategy Board, TSB) under SILOETII, in conjunction with Rolls-Royce PLC.

History

School

  • Aeronautical, Automotive, Chemical and Materials Engineering

Department

  • Aeronautical and Automotive Engineering

Published in

AIAA Journal: devoted to aerospace research and development

Citation

SUN, D. ... et al, 2016. Simulation of Particle Flow in Inertial Particle Separators with Eulerian VR-QMOM Method. AIAA Journal, 54(12), pp.3803-3812.

Publisher

AIAA / © The Authors

Version

AM (Accepted Manuscript)

Publisher statement

This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/

Acceptance date

11/06/2016

Publication date

2016-08-18

Notes

This paper was accepted for publication in the journal AIAA Journal and the definitive version is available at: http://dx.doi.org/10.2514/1.J054981

ISSN

0001-1452

Language

en

Exports

Logo branding

Keyword(s)

Exports