Tin and Zinc Whisker Growth from Electroplated Finishes TIMF MAA (2).pdf (809.57 kB)
0/0

Tin whisker growth from electroplated finishes: a review

Download (809.57 kB)
journal contribution
posted on 20.11.2013 by D. Bunyan, Mark Ashworth, Geoffrey Wilcox, Rebecca Higginson, Richard Heath, Changqing Liu
Tin whiskers are filamentary growths that are formed on the surface of electrodeposited tin, which is used extensively in the electronics industry. The presence of whiskers on electroplated finishes has been observed for more than 60 years, but, despite a huge amount of work in this area, a definite mechanism by which whiskers grow remains unidentified. Whiskers pose a significant problem for manufacturers of electrical and electronic equipment, since they are able to grow across and bridge the gap between adjacent electrical components, resulting in short-circuits and other associated failures. For many years, whisker growth was effectively mitigated by the addition of lead to tin electrodeposits. However, recent legislation prohibits the use of lead in new electrical and electronic devices, and thus alternative whisker reduction techniques are being sought. Effective mitigation is critical in ensuring that widespread whisker initiated failures can be avoided. However, since the mechanism, or mechanisms, which cause whisker growth remain unknown, the development of effective mitigation techniques is a significant industrial challenge, but a challenge which must be undertaken. This review examines some of the work undertaken to elucidate the whisker growth phenomenon. A brief history of whisker initiated failures along with key developments in whisker theory is presented. This is followed by a more detailed assessment of the several growth mechanisms hypothesised; dislocation-based, recrystallisation-based and compressive stress-based theories. The structure and properties of tin whiskers, along with factors that affect whisker growth and potential mitigation techniques are discussed.

History

School

  • Aeronautical, Automotive, Chemical and Materials Engineering

Department

  • Materials

Citation

BUNYAN, D. ... et al., 2013. Tin whisker growth from electroplated finishes: a review. Transactions of the Institute of Metal Finishing, 91 (5), pp. 249 - 259.

Publisher

© Institute of Materials Finishing. Published by Maney on behalf of the Institute

Version

AM (Accepted Manuscript)

Publication date

2013

Notes

This article was published in the Transactions of the Institute of Metal Finishing [© Institute of Materials Finishing] and the definitive version is available at: http://dx.doi.org/10.1179/0020296713Z.000000000119

ISSN

0020-2967

eISSN

1745-9192

Language

en

Exports

Logo branding

Exports