RLX-stop-compliance_accepted.pdf (12.16 MB)

To stop or not to stop: contrasting compliant and non-compliant driver behaviour at rural rail level crossings

Download (12.16 MB)
journal contribution
posted on 06.02.2018, 09:38 by Vanessa Beanland, Paul M. Salmon, Ashleigh Filtness, Michael G. Lenne, Neville Stanton
© 2017 Elsevier Ltd Many rail level crossings (RLXs) have only passive protection, such as static signs instructing road users to stop, yield, or look for trains. Stop signs have been suggested as a low-cost option to improve safety at passive RLXs, as requiring drivers to stop should encourage safe behaviour. However, field observations have noted high rates of non-compliance at stop-controlled RLXs. To explore this further, we conducted an on-road study to identify factors that influence compliance at stop-controlled RLXs. Twenty-two drivers drove a 30.5 km route in rural Australia, encompassing three stop-controlled RLXs. In over half of all cases (59%) drivers stopped completely at the RLX; on 27% of crossings drivers executed a rolling stop, and on 14% of crossings drivers violated the stop controls. Rolling stops were defined as a continuous deceleration to < 10 km/h, but remaining above 0 km/h, before accelerating to > 10 km/h. Behavioural patterns, including visual checks and decision-making, were similar when comparing drivers who made complete versus rolling stops. Non-compliant drivers did not differ from compliant drivers in approach speeds, but spent less time visually checking for trains. Post-drive interviews revealed some drivers wilfully disregarded the stop sign, whereas others did not notice the stop sign. Those who intentionally violated noted trains were infrequent and suggested sight distance was good enough (even though all crossings had been formally assessed as having inadequate sight distance). Overall the results suggest most drivers exhibit safe behaviour at passive RLXs, but a notable minority disregard or fail to notice signs. Potential avenues for redesigning passive RLXs to improve safety are discussed.

Funding

This research was supported by an Australian Research Council (ARC) Linkage Grant (LP100200387) to the University of the Sunshine Coast, Monash University, and the University of Southampton, in partnership with the Victorian Rail Track Corporation, Transport Safety Victoria, Public Transport Victoria, Transport Accident Commission, Roads Corporation (VicRoads) and V/Line Passenger Pty Ltd. VB is supported by an ARC Discovery Early Career Researcher Award (DE150100083) and PS is supported by an ARC Future Fellowship (FT140100681).

History

School

  • Design

Published in

Accident Analysis and Prevention

Volume

108

Pages

209 - 219

Citation

BEANLAND, V. ...et al., 2017. To stop or not to stop: contrasting compliant and non-compliant driver behaviour at rural rail level crossings. Accident Analysis and Prevention, 108, pp.209-219.

Publisher

© Elsevier

Version

AM (Accepted Manuscript)

Publisher statement

This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/

Publication date

2017-09-12

Notes

This paper was published in the journal Accident Analysis and Prevention and the definitive published version is available at https://doi.org/10.1016/j.aap.2017.09.004.

ISSN

0001-4575

Language

en

Exports

Logo branding

Exports