1-s2.0-S0306261921008679-main.pdf (7.76 MB)
A self-tuned rotational vibration energy harvester for self-powered wireless sensing in powertrains
journal contribution
posted on 2021-08-19, 10:33 authored by Ben Edward Gunn, Panagiotis Alevras, James FlintJames Flint, Hailing Fu, Steve Rothberg, Stephanos TheodossiadesStephanos TheodossiadesDuring conversion between mechanical and electrical energy within a machine, or vice-versa, vibrations (or perturbations of the rotational speed) are usually present. These vibrations can be converted into relatively small but useful amounts of electrical energy that can power wireless sensors. In this paper, a novel self-tuning concept of a rotational vibration energy harvester for energy conversion applications is presented. The design concept combines a self-tuned oscillator with an eccentric mass on a “tautochrone” path of motion so that its natural frequency matches a selected order of the rotational speed of a powertrain in order to harness the energy of rotational oscillations. This original vibration energy harvester design (which does not require protruding beams) enables the implementation of the concept for propulsion applications with the appropriate tuning condition. The mathematical modelling of the device and selection of the key design parameters suggest sufficient generated power to successfully drive an electronic circuit equipped with a temperature sensor. A physical prototype is manufactured and experimentally tested, validating the proposed design. The device is demonstrated to be capable of powering a wireless temperature sensor transmitting data every 2 s for a range of more than 1000 rpm of the shaft rotational speed. Higher data transmission rates could be achieved by optimising the design of the harvester, which currently has an overall volume <60 cm3.
Funding
Engineering and Physical Sciences Research Council (EPSRC) (Enterprise Projects Group No. 115, Miniaturisation of vibration energy harvester device for powering sensors in propulsion applications)
History
School
- Mechanical, Electrical and Manufacturing Engineering
Published in
Applied EnergyVolume
302Publisher
ElsevierVersion
- VoR (Version of Record)
Rights holder
© The AuthorsPublisher statement
This is an Open Access Article. It is published by Elsevier under the Creative Commons Attribution 4.0 International Licence (CC BY 4.0). Full details of this licence are available at: https://creativecommons.org/licenses/by/4.0/Acceptance date
2021-07-24Publication date
2021-08-07Copyright date
2021ISSN
0306-2619Publisher version
Language
- en