Characterization of metal-polymer interaction forces by AFM for insert moulding applications
journal contributionposted on 10.09.2020, 12:26 by Hrushikesh Abhyankar, Patrick Webb, Geoff West, David Hutt
There is a growing interest in the overmoulding of electronics with thermoplastics and the embedding of electronics in 3D printed parts. However long term device reliability requires good adhesion between the metallic surfaces of the electronic components and the overmoulding polymer. In order to provide a guide to material selection, interaction forces between tin, a common electronics metallisation and six commodity thermoplastics were studied. The force measurements were undertaken using Atomic Force Microscopy (AFM) with probes functionalised with tin particles. The particles were attached to the probes by a novel method using a Focused Ion Beam (FIB) instrument. Highly consistent cantilever deflections at pull-off were obtained, allowing the thermoplastics to be robustly ranked by strength of interaction with tin as: PC > PMMA > PBT > ABS > PS > PA 6. From consideration of possible contributions to the pull-off forces measured, it was concluded the data and the developed AFM tip functionalisation technique are likely to be useful in materials selection for electronics overmoulding with thermoplastics. The FIB functionalisation technique may be useful in the wider context of investigations of other metal-polymer interaction forces, for example with alloys, where other methods of functionalisation may be difficult to apply.
Read the paper on the publisher website
3D-Mintegration: the Design and Manufacture of 3D Integrated Miniaturised Products EP/C534212/1
- Mechanical, Electrical and Manufacturing Engineering