Chromatography of human prothrombin from Nitschmann fraction III on Q Sepharose Fast Flow using axial and radial flow column
journal contribution
posted on 2017-05-12, 15:15authored byTao SunTao Sun, Ge Chen, Yipin Liu, Fengrong Bu, Meijuan Wen
An axial column (Hitrap Q 5 ml, 2.5 × 1.6 cm) and a radial flow column (3.5 × 5 cm) packed with Q Sepharose Fast Flow media had been evaluated for the separation of human prothrombin. Nitschmann fraction III dissolved in buffered saline (0.10 M sodium chloride buffered with 0.06 M Tris/HCl to pH 7.5) was the starting material. Effects of sample flow rate of the two columns were screened. Under radial flow conditions using the radial column, sample flow rate up to 15 ml/min (i.e. 18 bed volumes/h) was achieved and the operating pressure was below 0.2 MPa eventhough the elution velocity was 30 ml/min. Breakthrough capacity was determined by analyzing the total protein and prothrombin activity of the target protein-containing fraction under subsaturating conditions and both columns had almost the same breakthrough capacity per ml media, indicating that the sample loading was independent of radial column geometry. It was concluded that the radial column is an attractive alternate to traditional axial packed bed column, exhibiting very good potential for use in the separation of human prothrombin.
History
School
Aeronautical, Automotive, Chemical and Materials Engineering
Department
Chemical Engineering
Published in
Bioprocess Engineering
Volume
23
Issue
2
Pages
0121 - 0125
Citation
SUN, T. ... et al, 2000. Chromatography of human prothrombin from Nitschmann fraction III on Q Sepharose Fast Flow using axial and radial flow column. Bioprocess Engineering, 23 (2), pp.121-125
This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/