Small Unmanned Aerial Vehicles (UAVs)
are attracting increasing interest due to their favourable features; small size, low weight and cost. These features also present different challenges in control design and aircraft operation. An accurate mathematical model is unlikely to be available meaning
optimal control methods become difficult to
apply. Furthermore, their reduced weight and inertia mean they are significantly more vulnerable to environmental disturbances such as wind gusts. Larger disturbances require more control actuation, meaning small UAVs are far more susceptible to actuator saturation. Failure to account for this can lead to controller windup and subsequent performance degradation. In this work, numerical simulations are conducted comparing
a baseline Linear Quadratic Regulator (LQR)
controller to integral augmentation and Disturbance Observer Based Control (DOBC). An anti-windup scheme is added to the DOBC to attenuate windup effects due to actuator saturation. A range of external
disturbances are applied to demonstrate performance.
The simulations conduct manoeuvres which would
occur during landing, statistically the most dangerous flight phase, where fast disturbance rejection is critical. Validation simulations are then conducted using commercial X-Plane simulation software. This demonstrates that DOBC with anti-windup provides faster disturbance rejection of both modelling errors and external disturbances.
History
School
Aeronautical, Automotive, Chemical and Materials Engineering
Department
Aeronautical and Automotive Engineering
Published in
Journal of Intelligent and Robotic Systems
Citation
SMITH J. ...et al., 2017. Disturbance observer based control with anti-windup applied to a small fixed wing UAV for disturbance rejection. Journal of Intelligent and Robotic Systems, 88(2-4), pp. 329-346.
This work is made available according to the conditions of the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Full details of this licence are available at: http://creativecommons.org/licenses/ by/4.0/
Acceptance date
2017-03-07
Publication date
2017-03-22
Notes
This is an Open Access Article. It is published by Springer under the Creative Commons Attribution 4.0 Unported Licence (CC BY). Full details of this licence are available at: http://creativecommons.org/licenses/by/4.0/