Many experiments conducted in the literature have investigated the effect of microneedles (MNs) on insulin permeation
across skin. There are also a number of articles that deal with the effect of MN insertion force in skin. However, there is
little known on quantifying the relationship between the effect of MN insertion force and the amount of insulin permeated
for given MNs. This issue is addressed in this article. MNs of 1100 μm and 1400 μm are used to conduct in vitro permeability
experiments on porcine skin, using insulin. Histological images of MN treated skin are obtained from a microtome and the
viscoelastic properties of the skin sample are measured using a rheometer. An in-house insertion force device is utilized
that can reproducibly apply a specified force on MNs for a set period of time using compressed air. It is deduced that when
porcine skin was pretreated with an applied force of 60.5 N and 69.1 N, the resultant amount of insulin permeated was
approximately 3 μg and 25 μg over a 4-hour period for the MNs used. The amount of MN force applied to porcine skin
was shown to be related to the amount of insulin permeated. An increase in insertion force increase the amount of insulin
permeated. It was also demonstrated that using insufficient force may have reduced or prevented the amount of insulin
passing through the skin, regardless of the geometry of the MNs.
Funding
This
work was partly supported by Loughborough University, UK and
EPSRC, UK.
History
School
Aeronautical, Automotive, Chemical and Materials Engineering
Department
Chemical Engineering
Citation
CHEUNG, K., HAN, T. and DAS, D.B., 2014. Effect of force of microneedle insertion on the permeability of insulin in skin. Journal of Diabetes Science and Technology, 8 (3), pp. 444-452.
This is an Open Access Article. It is published by Sage on behalf of the Diabetes Technology Society under the Creative Commons Attribution 3.0 Unported Licence (CC BY). Full details of this licence are available at: http://creativecommons.org/licenses/by/3.0/