Accepted Manuscript.pdf (2.64 MB)
Evaporation of liquid nitrogen droplets in superheated immiscible liquids
journal contributionposted on 2019-08-15, 15:27 authored by Neville Rebelo, Huayong ZhaoHuayong Zhao, Francois Nadal, Colin GarnerColin Garner, Andy Williams
Liquid nitrogen or other cryogenic liquids have the potential to replace or augment current energy sources in cooling and power applications. This can be done by the rapid evaporation and expansion processes that occur when liquid nitrogen is injected into hotter fluids in mechanical expander systems. In this study, the evaporation process of single liquid nitrogen droplets when submerged into n-propanol, methanol, n-hexane, and n-pentane maintained at 294 K has been investigated experimentally and numerically. The evaporation process is quantified by tracking the growth rate of the resulting nitrogen vapour bubble that has an interface with the bulk liquid. The experimental data suggest that the bubble volume growth is proportional to the time and the bubble growth rate is mainly determined by the initial droplet size. A comparison between the four different bulk liquids indicates that the evaporation rate in n-pentane is the highest, possibly due to its low surface tension. A scaling law based on the pure diffusion-controlled evaporation of droplet in open air environment has been successfully implemented to scale the experimental data. The deviation between the scaling law predictions and the experimental data for 2-propanol, methanol and nhexane vary between 4-30% and the deviation for n-pentane was between 24-65%. The more detailed bubble growth rates have been modelled by a heuristic one-dimensional, spherically symmetric quasi-steady-state confined model, which can predict the growth trend well but consistently underestimate the growth rate. A fixed effective thermal conductivity is then introduced to account for the complex dynamics of the droplet inside the bubble and the subsequent convective processes in the surrounding vapour, which leads to a satisfactory quantitative prediction of the growth rate.
Dearman Engine Company, UK
- Mechanical, Electrical and Manufacturing Engineering
Published inInternational Journal of Heat and Mass Transfer
- AM (Accepted Manuscript)
Rights holder© Elsevier Ltd.
Publisher statementThis paper was accepted for publication in the journal International Journal of Heat and Mass Transfer and the definitive published version is available at https://doi.org/10.1016/j.ijheatmasstransfer.2019.118575.