Eyewear antenna_IEEE_APWL.pdf (282.99 kB)
Download fileFeasibility study of 4G cellular antennas for eyewear communicating devices
journal contribution
posted on 2014-03-31, 13:17 authored by Aykut Cihangir, William WhittowWilliam Whittow, Chinthana PanagamuwaChinthana Panagamuwa, F. Ferrero, Gilles Jacquemod, Frederic Gianesello, Cyril LuxeyA feasibility study of 4G cellular antennas operating in the LTE, GSM, DCS, PCS, and WLAN2400 standards for wirelessly connected eyewear is presented. The target bands are 700-960 MHz and 1.7-2.7 GHz. The antenna designs are capacitive coupling element types, with simple layout printed on one side of the printed circuit board (PCB) substrate. Three different antennas are examined in terms of obtainable bandwidth potential, reflection coefficient, and specific absorption rate (SAR) values considering two human-head models (SAM and Visible Human). The best antenna is -6 dB matched and has radiation efficiencies around 14% and 36% in respectively low and high frequency bands. Based on simulation data, SAR values could be above the 1-g standards.
History
School
- Mechanical, Electrical and Manufacturing Engineering
Citation
CIHANGIR, A. ... et al, 2013. Feasibility study of 4G cellular antennas for eyewear communicating devices. IEEE Antennas and Wireless Propagation Letters, 12, pp. 1704 - 1707.Publisher
© IEEEVersion
- AM (Accepted Manuscript)
Publication date
2013Notes
This article was published in the journal, IEEE Antennas and Wireless Propagation Letters [© IEEE]. The definitive version is available at: http://dx.doi.org/10.1109/LAWP.2013.2287204ISSN
1536-1225Publisher version
Language
- en