Granular dynamics of cohesive powders in a rotating drum as revealed by speckle visibility spectroscopy and synchronous measurement of forces due to avalanching
posted on 2016-03-22, 15:02authored byH. Yang, G.L. Jiang, H.Y. Saw, C. Davies, Mark Biggs, Vladimir Zivkovic
We have used speckle visibility spectroscopy (SVS) and synchronized force measurements to compare the granular dynamics of two cohesive lactose powders, with Sauter mean diameters of ~29 and ~151 μm, in a rotating drum. A load cell (LC) was used to measure forces on the drum mounting frame and enable monitoring of bulk powder motion; SVS is a dynamic light scattering technique particularly suited for studying dynamics in dense, non-ergodic granular systems. Our results reveal that surface slumping and intermittent collisional dynamics in the bulk of the bed are correlated, especially for the fine more cohesive particles (Geldart group C/A boundary), but not as much for the less cohesive larger particles (Geldart group A/B boundary). The specific dissipation energy of the particles in the drum is similar for both powders, and increases linearly with increasing drum speed. However, the dependencies of the load cell and SVS signals on rotation speed have opposing trends for these two powders, indicating different dissipation mechanisms for the different Geldart Groups; collisional dissipation is more important for the Geldart C/A powder, while for the Geldart A/B powder avalanche dissipation is dominant.
Funding
This work has been supported by National Natural Science Foundation of China (11572201), Innovation Program of Shanghai Municipal Education Commission (15ZZ072) and Hujiang Foundation of China (C14002).
History
School
Science
Department
Chemistry
Published in
Chemical Engineering Science
Volume
146
Pages
1 - 9
Citation
YANG, H. ... et al, 2016. Granular dynamics of cohesive powders in a rotating drum as revealed by speckle visibility spectroscopy and synchronous measurement of forces due to avalanching. Chemical Engineering Science, 146, pp. 1 - 9.
This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/
Publication date
2016
Notes
This paper was accepted for publication in the journal Chemical Engineering Science and the definitive published version is available at http://dx.doi.org/10.1016/j.ces.2016.02.023