Low-cycle fatigue of single crystal nickel-based superalloy – mechanical testing and TEM characterisation
journal contributionposted on 2019-01-04, 10:54 authored by Lu Zhang, Liguo Zhao, Anish RoyAnish Roy, Vadim SilberschmidtVadim Silberschmidt, G. McColvin
Low-cycle fatigue (LCF) is studied for a nickel-based single-crystal superalloy in this paper, with a focus on the effect of crystal orientation and temperature. Specifically, cyclic deformation of the alloy was compared for - and -oriented samples tested under strain-controlled conditions at room temperature and 825 °C. Either cyclic hardening or softening was observed during the LCF process, depending on the strain amplitude, crystallographic orientation and temperature. LCF life was also reduced significantly by changing loading orientation from  to  or increasing temperature to 825 °C. Employing a comprehensive study with transmission electron microscopy (TEM), a connection between microstructure and mechanical behaviour of the alloy is discussed. It was found that the processes of γ′-precipitate dissolution and dislocation recovery were responsible for cyclic softening. Alignments and pile-ups of dislocations in the γ matrix, which prohibited their movement and reduced the interaction of dislocations on different slip systems, contributed to cyclic hardening.
This work was funded by the EPSRC (Grant EP/M000966/1 and EP/K026844/1) of the UK and in collaboration with GE Power, Rolls-Royce and dstl.
- Mechanical, Electrical and Manufacturing Engineering