Mechanics of ballistic impact with non-axisymmetric projectiles on thin aluminium targets. Part II: Energy considerations

In Part I of this study, the ballistic performance and failure mechanisms of a thin aluminium target impacted by plate-like, non-axisymmetric projectiles with three different geometries, were considered using the gas-gun experiments. Failure mechanisms of the target material were found to depend strongly on the projectile’s geometrical features. Also, the local target’s response was not a reliable predictor of the critical kinetic energy for perforation or penetration. In order to improve the prediction of ballistic performance of thin targets, a nonlocal target behaviour should also be accounted for. In this part of the study, the global target response is examined, and a heuristic approach is introduced for the energy balance. The approach involves a new factor that represents additional energy-dissipating mechanisms between the projectile’s critical energy and the local work in target defeat. The methodology is based on the identified strong correlation of the normalised impact-induced peak kinetic energy in the target, KE_T^max, and the normalised target impact-induced nonlocal internal energy, U_T^(PL+KE), associated with plastic deformation and increase in kinetic energy. A physically-based semi-analytical formulation for KE_T^max  is developed by decomposition of the contributions by the inclined and blunt projectile sections, succeeding statistical analysis of key projectile’s geometrical and impact parameters. The developed approach was assessed for 17 projectile geometries implementing a total of 119 finite-element simulations with experimentally validated numerical models at subcritical (50) and critical/supercritical (69) projectile velocities. The obtained predictions had an average absolute error of less than 6.5% for impact velocities at and above the ballistic limit, while at subcritical velocities a higher scatter was observed as a result of secondary interaction effects between the projectile and the target. Overall, the methodology yielded results for the ballistic limit with an error below 5%, improving the otherwise derived results nearly twofold. The method was proven to be a practical and accurate way to improve the projectile’s critical energy prediction for thin targets, and, even though developed for non-axisymmetric projectile cases, its framework is directly transferable to axisymmetric projectiles.