Loughborough University
Browse
materials-11-00001-2.pdf (1.21 MB)

Numerical modelling of effects of biphasic layers of corrosion products to the degradation of magnesium metal in vitro

Download (1.21 MB)
journal contribution
posted on 2018-01-18, 13:34 authored by Safia K. Ahmed, John WardJohn Ward, Yang LiuYang Liu
© 2017 by the authors. Magnesium (Mg) is becoming increasingly popular for orthopaedic implant materials. Its mechanical properties are closer to bone than other implant materials, allowing for more natural healing under stresses experienced during recovery. Being biodegradable, it also eliminates the requirement of further surgery to remove the hardware. However, Mg rapidly corrodes in clinically relevant aqueous environments, compromising its use. This problem can be addressed by alloying the Mg, but challenges remain at optimising the properties of the material for clinical use. In this paper, we present a mathematical model to provide a systematic means of quantitatively predicting Mg corrosion in aqueous environments, providing a means of informing standardisation of in vitro investigation of Mg alloy corrosion to determine implant design parameters. The model describes corrosion through reactions with water, to produce magnesium hydroxide Mg(OH) 2 , and subsequently with carbon dioxide to form magnesium carbonate MgCO 3 . The corrosion products produce distinct protective layers around the magnesium block that are modelled as porous media. The resulting model of advection-diffusion equations with multiple moving boundaries was solved numerically using asymptotic expansions to deal with singular cases. The model has few free parameters, and it is shown that these can be tuned to predict a full range of corrosion rates, reflecting differences between pure magnesium or magnesium alloys. Data from practicable in vitro experiments can be used to calibrate the model's free parameters, from which model simulations using in vivo relevant geometries provide a cheap first step in optimising Mg-based implant materials.

History

School

  • Mechanical, Electrical and Manufacturing Engineering

Published in

Materials

Volume

11

Issue

1

Citation

AHMED, S.K., WARD, J.P. and LIU, Y., 2017. Numerical modelling of effects of biphasic layers of corrosion products to the degradation of magnesium metal in vitro. Materials, 11(1): 1.

Publisher

© The Authors. Published by MDPI.

Version

  • VoR (Version of Record)

Publisher statement

This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/

Acceptance date

2017-12-14

Publication date

2017-12-21

Copyright date

2018

Notes

This is an Open Access Article. It is published by MDPI under the Creative Commons Attribution 4.0 Unported Licence (CC BY). Full details of this licence are available at: http://creativecommons.org/licenses/by/4.0/

eISSN

1996-1944

Language

  • en

Usage metrics

    Loughborough Publications

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC