Loughborough University
Browse
Z Chen Perpenticular Growth IMCs JEM 2015 accepted-1.pdf (2.11 MB)

Perpendicular growth characteristics of Cu-Sn intermetallic compounds at the surface of Sn99Cu1/Cu solder interconnects

Download (2.11 MB)
journal contribution
posted on 2015-11-16, 11:10 authored by Zhiwen Chen, Changqing Liu, Yiping Wu, Bing An
The growth of intermetallic compounds (IMCs) on the free surface of 99Sn-1Cu solder joints perpendicular to the interdiffusion direction has been investigated in this work. The specimens were specifically designed and polished to reveal a flat free surface at the solder/Cu interface for investigation. After aging at 175°C for progressively increased durations, the height of the perpendicular IMCs was examined and found to follow a parabolic law with aging duration that could be expressed as \(y = 0.11\sqrt t\), where t is the aging duration in hours and y is the height of the perpendicular IMCs in μm. For comparison, the planar growth of IMCs along the interdiffusion direction was also investigated in 99Sn-1Cu/Cu solder joints. After prolonged aging at 175°C, the thickness of the planar interfacial IMC layers also increased parabolically with aging duration and could be expressed as \(h_{\rm{IMC}} = 0.27\sqrt t + 4.6\), where h is the thickness in μm and t is the time in hours. It was found that both the planar and perpendicular growth of the IMCs were diffusion-controlled processes, but the perpendicular growth of the IMCs was much slower than their planar growth due to the longer diffusion distance. It is proposed that Cu3Sn forms prior to the formation of Cu6Sn5 in the perpendicular IMCs, being the reverse order compared with the planar IMC growth.

History

School

  • Mechanical, Electrical and Manufacturing Engineering

Published in

Journal of Electronic Materials

Citation

CHEN, Z. ...et al., 2015. Perpendicular growth characteristics of Cu-Sn intermetallic compounds at the surface of Sn99Cu1/Cu solder interconnects. Journal of Electronic Materials, 44(12), pp. 4836-4845.

Publisher

© The Minerals, Metals & Materials Society. Published by Springer.

Version

  • AM (Accepted Manuscript)

Publisher statement

This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/

Publication date

2015

Notes

The final publication is available at Springer via http://dx.doi.org/10.1007/s11664-015-4043-7

ISSN

0361-5235

Language

  • en