Simulation of inertial behavior of dilute particle flow in horizontal channel with Eulerian method of velocity-reassociated quadrature-based method of moments
The velocity reconstructed two-node quadrature-based method of moments (VR-QMOM) is a robust Eulerian method which is able to predict the crossing trajectory and surface bouncing phenomena for dilute particle flow. It is used here to predict the particle-laden flow in the dilute particle concentration in a horizontal channel. The multiphase simulation was carried out in the Eulerian-Eulerian two-phase model with VR-QMOM for the particle phase and for comparison with the more established Eulerian-Lagrangian two-phase flow method. The gas phase is simulated with RANS equations and discretised with second-order upwind spatial numerical schemes. Comparing the predicted particle flows obtained using the VR-QMOM and Eulerian-Lagrangian approaches, the conclusion can be made that the VR-QMOM can successfully predict bouncing multiphase flows with dilute particle phase. Both trajectory crossing and bouncing behaviour and the trend with increasing particle size are reproduced. The two-node VR-QMOM is seen to be an alternative methodology for the prediction of dispersed particle flow problems.
Funding
This work has been funded by the Innovate UK (formerly the United Kingdom Technology Strategy Board, TSB) under SILOET II, in conjunction with Rolls-Royce PLC.
History
School
Aeronautical, Automotive, Chemical and Materials Engineering
Department
Aeronautical and Automotive Engineering
Published in
Powder Technology
Volume
304
Pages
157–163
Citation
SUN, D., GARMORY, A. and PAGE, G.J., 2016. Simulation of inertial behavior of dilute particle flow in horizontal channel with Eulerian method of velocity-reassociated quadrature-based method of moments. Powder Technology, 304, pp. 157–163.
This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/
Acceptance date
2016-09-10
Publication date
2016-09-14
Copyright date
2016
Notes
This paper was accepted for publication in the journal Powder Technology and the definitive published version is available at http://dx.doi.org/10.1016/j.powtec.2016.09.035.