This paper examines the effect of compressor generated inlet conditions on the air flow uniformity through lean burn fuel injectors. Any resulting non-uniformity in the injector flow field can impact on local fuel air ratios and hence emissions performance. The geometry considered is typical of the lean burn systems currently being proposed for future, low emission aero engines.
Initially, RANS CFD predictions were used to examine the flow field development between compressor exit and the inlet to the fuel injector. This enabled the main flow field features in this region to be characterized along with identification of the various stream-tubes captured by the fuel injector passages. The predictions indicate the resulting flow fields entering the injector passages are not uniform. This is particularly evident in the annular passages furthest away from the injector center-line which pass the majority of the flow which subsequently forms the main reaction zone within the flame tube. Detailed experimental measurements were also undertaken on a fully annular facility incorporating an axial compressor and lean burn combustion system. The measurements were obtained at near atmospheric pressure/temperatures and under non-reacting conditions. Time-resolved and time-averaged data were obtained at various locations and included measurements of the flow field issuing from the various fuel injector passages. In this way any non-uniformity in these flow fields could be quantified. In conjunction with the numerical data, the sources of non-uniformities in the injector exit plane were identified. For example, a large scale bulk variation (+/-10%) of the injector flow field was attributed to the development of the flow field upstream of the injector, compared with localized variations (+/-5%) that were generated by the injector swirl vane wakes. Using this data the potential effects on fuel injector emissions performance can be assessed.
History
School
Aeronautical, Automotive, Chemical and Materials Engineering
Department
Aeronautical and Automotive Engineering
Published in
PROCEEDINGS OF THE ASME TURBO EXPO 2012, VOL 8, PTS A-C
Pages
1667 - 1677 (11)
Citation
FORD, C.L., CARROTTE, J.F. and WALKER, A.D., 2012. The impact of compressor exit conditions on fuel injector flows. IN: ASME Turbo Expo 2012: Turbine Technical Conference and Exposition
Volume 8: Turbomachinery, Parts A, B, and C
Copenhagen, Denmark, June 11–15, pp. 1667-1677.
This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/