Thermal insulation and clothing area factors of typical Arabian Gulf clothing ensembles for males and females: measurements using thermal manikins
journal contributionposted on 15.11.2007, 15:21 authored by Farraj F. Al-Ajmi, Dennis LovedayDennis Loveday, K.H. Bedwell, George HavenithGeorge Havenith
The thermal insulation of clothing is one of the most important parameters used in the thermal comfort model adopted by the International Standards Organisation (ISO) (ISO 7730, 2005) and by ASHRAE (ASHRAE-55, 2005). To date, thermal insulation values of mainly Western clothing have been published with only minimal data being available for non-Western clothing. Thus, the objective of the present study is to measure and present the thermal insulation (clo) values of a number of Arabian Gulf garments as worn by males and females. The clothing ensembles and garments of Arabian Gulf males and females presented in this study are representative of those typically worn in the region during both summer and winter seasons. Measurements of total thermal insulation values (clo) were obtained using a male and a female shape thermal manikin in accordance with the definition of insulation as given in ISO 9920. In addition, the clothing area factors (ƒcl) determined in two different ways were compared. The first method used a photographic technique and the second a regression equation as proposed in ISO 9920, based on the insulation values of Arabian Gulf male and female garments and ensembles as they were determined in this study. In addition, fibre content, descriptions and weights of Arabian Gulf clothing have been recorded and tabulated in this study. The findings of this study are presented as additions to the existing knowledge base of clothing insulation, and provide for the first time data for Arabian Gulf clothing. The analysis showed that for these non-Western clothing designs, the most widely-used regression calculation of cl f is not valid. However, despite the very large errors in cl f made with the regression method, the errors this causes in the intrinsic clothing insulation value, cl I, are limited.
- Architecture, Building and Civil Engineering