Loughborough University
Browse
1-s2.0-S0038092X18310429-main.pdf (3.72 MB)

Vacuum enclosures for solar thermal panels Part 2: Transient testing with an uncooled absorber plate

Download (3.72 MB)
journal contribution
posted on 2018-12-05, 14:12 authored by Farid Arya, Roger Moss, Trevor Hyde, Stan Shire, Paul Henshall, Philip EamesPhilip Eames
Creating a vacuum (<1 Pa) around a solar absorber in a flat plate solar thermal collector can increase efficiency by minimising gaseous conduction and convection between the absorber plate and the glass cover. High performance and architecturally attractive flat plate solar thermal collectors are appealing to building owners and designers for supplying clean and renewable energy cost effectively produced via the façade of the building. This two part paper describes the construction techniques and thermal performance of two vacuum enclosures, fabricated at Ulster University, as prototype components for evacuated flat plate solar collectors. The enclosures were tested at three conditions: 0.0033 Pa, 17 Pa and atmospheric pressure. The first enclosure consisted of two glass panes, sealed to an edge spacer and separated by an array of support pillars on a regular square grid to form a narrow evacuated space. The second enclosure, incorporated an uncooled copper plate to represent a solar thermal absorber. Part 1 of this paper has described the fabrication techniques and compared results from hot-box calorimeter and IR thermography testing of the first enclosure with numerical and analytical predictions. Part 2 describes solar simulator testing of the second enclosure which incorporated an uncooled copper plate. Testing under a solar simulator showed a higher stagnation temperature in the high vacuum test (0.0033 Pa) in comparison with the low vacuum (17 Pa) and atmospheric pressure tests. Curve fitting of a heat transfer model to the transient response data demonstrated that radiation and gas conduction were close to predictions. Simulated results were in close agreement with both the transient response and the steady-state asymptotic plate temperatures.

Funding

The authors are grateful to the Engineering and Physical Sciences Research Council (EPSRC) for funding this work as part of a collaborative programme between the University of Warwick, Loughborough University and Ulster University, reference EP/K009915/1, EP/K010107/1 and EP/K009230/1.

History

School

  • Mechanical, Electrical and Manufacturing Engineering

Published in

Solar Energy

Volume

174

Pages

1224 - 1236

Citation

ARYA, F. ... et al, 2018. Vacuum enclosures for solar thermal panels Part 2: Transient testing with an uncooled absorber plate. Solar Energy, 174, pp.1224-1236.

Publisher

Elsevier © The Authors

Version

  • VoR (Version of Record)

Publisher statement

This work is made available according to the conditions of the Creative Commons Attribution 4.0 International (CC BY 4.0) licence. Full details of this licence are available at: http://creativecommons.org/licenses/ by/4.0/

Acceptance date

2018-09-15

Publication date

2018-10-30

Notes

This is an Open Access Article. It is published by Elsevier under the Creative Commons Attribution 4.0 International Licence (CC BY). Full details of this licence are available at: https://creativecommons.org/licenses/by/4.0/

ISSN

0038-092X

Language

  • en

Usage metrics

    Loughborough Publications

    Licence

    Exports

    RefWorks
    BibTeX
    Ref. manager
    Endnote
    DataCite
    NLM
    DC