Luer adapter (BODY)

Threaded Luer Adapter, male luer taper to female 1/4-28" (UNF) Flat Bottom female thread.

The part is to be used as the chemically resistant body of a luer adapter with 1mm channel bore and integrated O-ring. The combined body and threaded insert structure is to be used for coupling a line of tubing to a standard luer-lock mdeical/laboratory grade syringe via a feruled male nut. (see Luer adapter (Insert)' for threaded insert counterpart).

Part is to be printed in Polypropylene in an upright orientation. A 0.1mm layer and 100% infill is required along with a material flow rate of 110%. The part can be impregnated with its PLA threaded insert by loading both body and insert components into the slicing software, and positioning the body at coordinates X:0, Y:0, Z:2. and the insert at X:0, Y:0, Z:0. Once grouped (by selecting both parts, right clicking and selecting 'Group Models) a PLA support scaffold should be generated to uphold the 90^o central overhang, the PLA support should be printed with an infill of 100% to prevent any surface defects occurring that may lead to leakage during its use. a 10mm PLA adhesion brim should also be generated.