Tee-connector (CORE)

The part is to be used as the chemically resistant channeled core of a Tee-connector. The combined Core-shell structure is to be used for unifying three separate lines of tubing (two inlets into one outlet) via three feruled male threaded nuts. (see 'Tee-connector (SHELL)' for shell counterpart).

Part is to be printed in Polypropylene in horizontal orientation such that all integrated O-rings are visible and facing outward. A 0.1mm layer and 100% infill is required along with a material flow rate of 110%. The part can be integrated into its PLA shell structure by loading both core and shell components into the slicing software, and positioning the core at coordinates X:0, Y:0, Z:1.5. and the shell at X:0, Y:0, Z:0 (ensure all O-rings are aligned with the shell female threads, rotate the core structure along the Z axis accordingly to achieve this). Once grouped (by selecting both parts, right click and select 'Group Models), the part should be raised 10mm above the build plate and a PLA support scaffold should be generated along with a 10mm PLA adhesion brim.