GAK_2018_01-02_Ansarifar.pdf (1.04 MB)
Schwefelvernetzung von Kautschuk auf dem Prufstand
online resource
posted on 2018-03-09, 11:53 authored by Ali Ansarifar, Saad Sheikh, Jonathan Dushyanthan, George WeaverGeorge Weaver, K.G.U. WijayanthaSulfenamidbeschleuniger in Kombination mit Zinkoxid finden in Schwefelvulkanisationssystemen für eine Vielzahl industrieller Kautschukprodukte
breite Anwendung. Allerdings gibt der exzessive Einsatz dieser Materialien Grund zu Besorgnis, was ihren negativen
Einfluss auf Meeresflora und -fauna, die Gesundheit und die Umwelt angeht. In dieser Arbeit wurde Zinkoxid in einem organischen
Lösemittel mit einem Sulfenamidbeschleuniger funktionalisiert, um ein einfach anzuwendendes Additiv aus nur einem Material herzustellen.
Dann wurde der Einfluss auf die Vulkanisationseigenschaften von Naturkautschuk untersucht. Ziel war es, den Einsatz dieser
beiden Chemikalien im Vulkanisationssystem zu verringern und die Effizienz der Schwefelvulkanisation des Kautschuks zu erhö-
hen. Die Funktionalisierung des Zinkoxids mit dem Beschleuniger verringerte den exzessiven Einsatz dieser Chemikalien im Vulkanisationssystem.
Ein Vergleich mit den Vulkanisationseigenschaften eines schwefelvulkanisierten Naturkautschuks für Reifen zeigte, dass
die optimale Vulkanisationszeit deutlich kürzer und die Vulkanisationsgeschwindigkeit bedeutend höher war, obwohl die Verwendung
der beiden Vernetzer um fast 77 % reduziert worden war. Alles deutet darauf hin, dass sich die Vernetzungseffizienz deutlich verbessert,
obwohl die Menge der Chemikalien im Vulkanisationssystem reduziert wird.
Sulphenamide accelerators in combination with zinc oxide activator are used extensively in the sulphur cure systems of a wide range
of industrial rubber articles. However, the excessive use of these chemicals has raised major concern regarding their adverse effect
on marine life and human health as well as the environment. Zinc oxide was functionalized with a sulphenamide accelerator in
an organic solvent to provide a convenient single material to use as an additive. The effect of the additive on the cure properties of
natural rubber was then measured. The aim was to minimize the use of these two chemicals in the cure system and enhance the efficiency
of the sulphur vulcanisation of the rubber. Functionalising zinc oxide with the accelerator reduced the excessive use of these
chemicals in the cure system. When the cure properties were compared with those of a sulphur cure-based natural rubber compound
used to make tyres, the optimum cure time was noticeably shorter and the rate of cure significantly faster despite reducing the use
of these two curatives by by almost 77 %. All the indications are that the cure efficiency improves considerably when the chemicals
in the cure system are reduced.
History
School
- Aeronautical, Automotive, Chemical and Materials Engineering
Department
- Materials
Published in
GAK Gummi Fasern KunststoffeIssue
January/FebruaryPages
48 - 53 (6)Citation
ANSARIFAR, A. ... et al., 2018. Schwefelvernetzung von Kautschuk auf dem Prüfstand. GAK Gummi Fasern Kunststoffe, (January/February), pp. 48 - 53.Publisher
© Dr. Gupta VerlagVersion
- VoR (Version of Record)
Publisher statement
This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/Acceptance date
2017-11-30Publication date
2018Notes
This paper appears here with the kind permission of the publisher. It is also available at https://www.gupta-verlag.com/magazines/gak-gummi-fasern-kunststoffe. This paper is written in German.ISSN
0176-1625Publisher version
Language
- de