Thesis-2005-Kong.pdf (17.81 MB)
Computer simulation of the takeoff in springboard diving
thesisposted on 2011-11-08, 13:10 authored by Pui W. Kong
A computer simulation model of a springboard and a diver was developed to investigate diving takeoff techniques in the forward and the reverse groups. The springboard model incorporated vertical, horizontal and rotational movements based on experimental data. The diver was modelled as an eight-segment link system with torque generators acting at the metatarsal-phalangeal, ankle, knee, hip and shoulder joints. Wobbling masses were included within the trunk, thigh and shank segments to allow for soft tissue movement. The foot-springboard interface was represented by spring-dampers acting at the heel, ball and toes of the foot. The model was personalised to an elite diver so that simulation output could be compared with the diver's own performance. Kinematic data of diving performances from a one-metre springboard were obtained using high speed video and personalised inertia parameters were determined from anthropometric measurements. Joint torque was calculated using a torque / angle / angular velocity relationship based on the maximum voluntary torque measured using an isovelocity dynamometer. Visco-elastic parameters were determined using a subject-specific angledriven model which matched the simulation to the performance in an optimisation process. Four dives with minimum and maximum angular momentum in the two dive groups were chosen to obtain a common set of parameters for use in the torque-driven model. In the evaluation of the torque-driven model, there was good agreement between the simulation and performance for all four dives with a mean difference of 6.3%. The model was applied to optimise for maximum dive height for each of the four dives and to optimise for maximum rotational potential in each of the two dive groups. Optimisation results suggest that changing techniques can increase the dive height by up to 2.0 cm. It was also predicted that the diver could generate rotation almost sufficient to perform a forward three and one-half somersault tuck and a reverse two and one-half somersault tuck.
- Sport, Exercise and Health Sciences
Publisher© Pui Wah Kong
NotesA Doctoral Thesis. Submitted in partial fulfillment of the requirements for the award of Doctor of Philosophy of Loughborough University.
EThOS Persistent IDuk.bl.ethos.417008