posted on 2007-11-26, 15:19authored byJonathan Paul Edwards
Pavement foundations for major roads in the UK were historically designed on an empirical
basis, related to a single design chart, restricting the incorporation of superior performing
materials or materials for which the empirical data sets were not available. The adoption of
performance based specifications was promoted as they are perceived to ‘open up’ the use of
alternative materials (including ‘local’ sources of primary materials) or techniques, and allow for
the incorporation of superior performance into the overall pavement design. Parallel
developments to the performance based design of pavement foundations (allowing for superior
performance) and in situ testing required the support of laboratory based performance tests.
These laboratory based tests were required to determine material performance parameters
(elastic modulus and resistance to permanent deformation) for both unbound and hydraulically
bound pavement foundation materials. A review of the available laboratory apparatus indicated
that they were either; unrealistic (and hence unable to provide the required material
performance parameters), or overly complex and more suited to fundamental research.
Therefore, the requirement for developmental research work was identified. The research
reported herein details the development, manufacture and initial evaluation of simplified
laboratory apparatus (the Springbox for unbound materials and static stiffness test for
hydraulically bound mixtures) designed to produce the performance parameters of elastic
modulus and relative resistance to permanent deformation for pavement foundation materials.
The equipment and test procedure evaluation was undertaken across a range of materials,
giving initial guidance on likely in situ performance.
The innovative laboratory apparatus and materials guidance (including the potential to use
recycled and secondary aggregates) was incorporated into key Highways Agency specification
and guidance documents, which in turn influence construction practice outside of motorways
and major trunk roads. This research concludes by outlining a number of recommendations for
continued development and evaluation, including feeding back data sets from long term in situ
performance testing for subsequent refinement of assumptions.
History
School
Architecture, Building and Civil Engineering
Research Unit
Centre for Innovative and Collaborative Engineering (CICE)
A dissertation thesis submitted in partial fulfilment of the requirements for the award of the degree Doctor of Engineering (EngD), at Loughborough University.