Thesis-1970-Rice.pdf (9.28 MB)
Download filePool boiling: pool boiling heat transfer from a stationary and a vibrating wire to pure liquids and to binary mixtures
thesis
posted on 2018-07-04, 10:49 authored by Peter RicePool boiling heat transfer data from a 0.0315 cm diameter 'Alumel'
wire 15.2 cm long of which the middle 8.9 cm was used as the heat
transfer surface to water, toluene, methanol, carbon tetrachloride,
normal propyl alcohol and to binary mixtures of isopropyl alcohol/water
are reported. Experiments were carried out on a stationary and on a
vibrating wire. The ranges of vibrational parameters were frequencies up
to 124 Hz and amplitudes up to 0.203 cm, i.e. approximately seven times
the wire diameter. [Continues.]
History
School
- Aeronautical, Automotive, Chemical and Materials Engineering
Department
- Chemical Engineering
Publisher
© Peter RicePublisher statement
This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/Publication date
1970Notes
A Doctoral Thesis. Submitted in partial fulfilment of the requirements for the award of Doctor of Philosophy at Loughborough University.Language
- en