Loughborough University
Browse
IMAGE
tcoi_a_1774213_sm8576.tif (1.78 MB)
VIDEO
tcoi_a_1774213_sm9570.mov (17.65 MB)
1/0
2 files

Supplementary Information files for Enhanced interfacial adhesion and mechanical performance of lightweight polyurethane foam reinforced with a low content of aligned magnetised short carbon fibres

dataset
posted on 2021-08-17, 13:01 authored by Carmen TorresCarmen Torres, M. Haghighi Abyaneh, Joseph Holt, Bradley Mee, Jing Wang, Paul ConwayPaul Conway
Supplementary Information files for Enhanced interfacial adhesion and mechanical performance of lightweight polyurethane foam reinforced with a low content of aligned magnetised short carbon fibres
An increase in interfacial properties between the matrix, a polyurethane cellular foam, and the reinforcement, a short carbon fibre, led to improved mechanical properties of a light-weight composite. The carbon fibre surface modification was designed with two aims: to possess magnetic properties so the discontinuous fibres could be aligned on-demand during the manufacturing process via a weak magnetic field and, to promote interfacial adhesion between the matrix and the reinforcement. After surface treatment, functionalising and coating with magnetite nanoparticles created and deposited in situ via electrodeposition prior to their deployment, the fibres were susceptible to magnetic manipulation and orientation within the reacting foam. The fibre coating contributed to interfacial compatibilization between the matrix and the reinforcement. Comparing the results between unreinforced, reinforced with untreated fibre, and reinforced with magnetised fibre, the results show that: foam reinforced with a low %vol content, i.e. from 0.1%vol to 0.4%vol, of any of the fibres improved specific strength, stiffness and toughness in tension relative to the unreinforced cellular polymeric matrix without densification, modification of cell size or compromising their lightweight properties. The magnetised fibre-containing composites showed significantly improved mechanical properties, in particular in tension, when compared to the untreated fibres due to their enhanced interfacial adhesion and their alignment in the matrix. Results in compression only yielded improvement in compressive strength, with other properties being similar to the unreinforced matrices. No significant differences were observed between the magnetised (aligned fibres) and the untreated (randomly distributed) configurations in compression.

Funding

EPSRC Centre for Doctoral Training in Embedded Intelligence

Engineering and Physical Sciences Research Council

Find out more...

NPIF EPSRC Doctoral - Loughborough University 2017

Engineering and Physical Sciences Research Council

Find out more...

History

School

  • Mechanical, Electrical and Manufacturing Engineering