posted on 2018-08-15, 09:15authored byTina L. Addington
Wheatfeed is a low value by-product of the cereal milling industry and has
potential as an ingredient of pet foods. However, it has a high fibre content and
this renders it unsuitable for non-ruminants unless some means can be found to
convert the fibre to more digestible substances. This work considers enzyme
hydrolysis as a means for improving the nutritional value of wheatfeed.
Preliminary investigations focused on evaluating mixtures of enzymes in various
combinations. The extent of hydrolysis was routinely assayed by measuring the
release of sugars and proteins. Further experiments were performed to establish
the optimal conditions under which a mixture of enzymes, comprising cellulase,
hemicellulase and pectinase, hydrolysed wheatfeed. Studies were also conducted
where these enzymes were added sequentially to wheatfeed and useful
information was gained on the composition of the susceptible components. Steam
explosion was investigated as a pretreatment of wheatfeed to make subsequent
enzyme treatment more effective. However, the results were inconclusive. Trials
were carried out using commercially available enzymes to compare their
effectiveness on the wheatfeed. A cellulase, was selected for further investigation
into the effects of particle size, extent of agitation, and enzyme concentration on
sugar release. An empirical mathematical model describing the action of this
enzyme was developed. Enzyme treatment of wheatfeed was also performed
under conditions of reduced water content, or 'solid state'. However, enzyme
action was limited, yielding lower quantities of sugars and protein.
The treatment of wheatfeed with enzymes was shown to increase digestibility of
the substrate. However, the high costs of enzymes would effectively rule this out
as a commercial option and alternative methods such as for example a form of
composting using cellulolytic fungi might prove more economic.
Funding
Pedigree Masterfoods ltd.
History
School
Aeronautical, Automotive, Chemical and Materials Engineering
This work is made available according to the conditions of the Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) licence. Full details of this licence are available at: https://creativecommons.org/licenses/by-nc-nd/4.0/
Publication date
2005
Notes
A Doctoral Thesis. Submitted in partial fulfilment of the requirements for the award of Doctor of Philosophy at Loughborough University.